A quick twist is all it takes to install Quik Tip contact tips!
Bernard Quik Tip™ consumables are designed with a threaded taper lock between the contact tip and the gas diffuser that increases tip life by providing excellent heat transfer and electrical conductivity.
Not currently using a Bernard® MIG gun? Our Quik Tip conversion series consumables allows you to convert your Lincoln®, Miller®, and Tweco® MIG gun consumables so you can still enjoy the benefits of Quik Tip consumables.
Gas diffusers have positive stops to secure Quik Tip contact tips in a fixed position for superior repeatability and consistent quality welds – multiple fixed positions available
Nozzles are available in threaded and slip-on styles
Looking for heavy-duty consumables?
The Quik Tip HD series is designed specifically for shipbuilding, trailer fabrication or any heavy equipment manufacturing operation.
Features a removable nozzle cone that lowers downtime and consumable costs by allowing operators to replace only the cone, the most frequently damaged part of the nozzle, without removing and replacing the entire nozzle and contact tip
Contains an increased wall thickness and insulating material to reduce the number of changeovers caused by heat degradation
Available with Quik Tip series 1 contact tips
System Components
Quik Tip Consumables
Quik Tip contact tips
Quik Tip gas diffusers
Quik Tip nozzles
Neck insulators
4323R (small profile / slimline insulator)
4423R (large insulator)
Quik Tip HD Series Consumables
Quik Tip contact tips
Quik Tip gas diffusers
Quik Tip nozzle cones
Quik Tip nozzle bodies
Neck insulators
4423R (large insulator)
Product Compatibility
Quik Tip consumables are compatible with the following:
for 0.023″-0.030″ (0.6-0.8 mm) wire, 15 ft (4.57 m)
L1A-25
Yellow
for 0.023″-0.030″ (0.6-0.8 mm) wire, 25 ft (7.62 m)
L2A-15
Green
for 0.030″-0.035″ (0.8-0.9 mm) wire, 15 ft (4.57 m)
L2A-25
Green
for 0.030″-0.035″ (0.8-0.9 mm) wire, 25 ft (7.62 m)
L3A-15*
White
for 0.035″-0.045″ (0.9-1.2 mm) wire, 15 ft (4.57 m)
L3A-25*
White
for 0.035″-0.045″ (0.9-1.2 mm) wire, 25 ft (7.62 m)
L4A-15**
Red
for 0.045″-1/16″ (1.2-1.6 mm) wire, 15 ft (4.57 m)
L4A-25**
Red
for 0.045″-1/16″ (1.2-1.6 mm) wire, 25 ft (7.62 m)
L6A-15
Blue
for 5/64″ (2.0 mm) wire, 15 ft (4.57 m)
L6A-25
Blue
for 5/64″ (2.0 mm) wire, 25 ft (7.62 m)
L7A-15
Grey
for 3/32″ (2.4 mm) wire, 15 ft (4.57 m)
L7A-25
Grey
for 3/32″ (2.4 mm) wire, 25 ft (7.62 m)
L8A-15
Black
for 7/64″-1/8″ (2.8-3.2 mm) wire, 15 ft (4.57 m)
L8A-25
Black
for 7/64″-1/8″ (2.8-3.2 mm) wire, 25 ft (7.62 m)
*Standard liner for guns using 0.035″ and 0.045″ wire **Standard liner for guns using 1/16″ wire
QUICK LOAD® Liners
Part Number
Description
415-23-15Q
for 0.023″ wire, 15′ length; high carbon steel – round wound; replaces conventional liner 415-23-15
415-30-6Q
for 0.030″ wire, 6′ length; high carbon steel – round wound; replaces conventional liner 415-30-6
415-30-15Q
for 0.030″ wire, 15′ length; high carbon steel – round wound; replaces conventional liner 415-30-15
415-35-6Q
for 0.035″ – 0.045″ wire, 6′ length; high carbon steel – round wound; replaces conventional liner 415-35-6
415-35-10Q
for 0.035″ – 0.045″ wire, 10′ length; high carbon steel – round wound; replaces conventional liner 415-35-10
415-35-15Q
for 0.035″ – 0.045″ wire, 15′ length; high carbon steel – round wound; replaces conventional liner 415-35-15
415-35-25Q
for 0.035″ – 0.045″ wire, 25′ length; high carbon steel – round wound; replaces conventional liner 415-35-25
415-116-6Q
for 0.045″ – 1/16″ wire, 6′ length; high carbon steel – round wound; replaces conventional liner 415-116-6
415-116-10Q
for 0.045″ – 1/16″ wire, 10′ length; high carbon steel – round wound; replaces conventional liner 415-116-10
415-116-15Q
for 0.045″ – 1/16″ wire, 15′ length; high carbon steel – round wound; replaces conventional liner 415-116-15
415-116-25Q
for 0.045″ – 1/16″ wire, 25′ length; high carbon steel – round wound; replaces conventional liner 415-116-25
415-564-6Q
for 1/16″ – 5/64″ wire, 6′ length; high carbon steel – round wound; replaces conventional liner 415-564-6
415-564-15Q
for 1/16″ – 5/64″ wire, 15′ length; high carbon steel – round wound; replaces conventional liner 415-564-15
415-564-25Q
for 1/16″ – 5/64″ wire, 25′ length; high carbon steel – round wound; replaces conventional liner 415-564-25
415-332-6Q
for 0.078″ – 3/32″ wire, 6′ length; high carbon steel – round wound; replaces conventional liner 415-332-6
415-332-15Q
for 0.078″ – 3/32″ wire, 15′ length; high carbon steel – round wound; replaces conventional liner 415-332-15
415-332-25Q
for 0.078″ – 3/32″ wire, 25′ length; high carbon steel – round wound; replaces conventional liner 415-332-25
QUICK LOAD Liner Retainers
Required for initial QUICK LOAD liner installation only (sold separately)
Part Number
Description
415-24*
for 0.078″ – 3/32″ wire
415-26*
for 0.030″ – 5/64″ wire
415-37**
for 0.030″ – 5/64″ wire
*Compatible with Tregaskiss® robotic and automatic MIG guns and Bernard® BTB and TGX® semi-automatic air-cooled MIG guns ** Compatible with most Tweco® MIG guns
Liners for Aluminum Wire
Part Number
Description
415-45-02
Polymer liner for 0.035″ – 3/64″ aluminum wire, 10′ length
415-45-03
Polymer liner for 0.035″ – 3/64″ aluminum wire, 15′ length
