NEW TECHNOLOGY!
QUICK LOAD™ Liner AutoLength™ System


The QUICK LOAD™ Liner AutoLength™ System is designed specifically to minimize downtime, wire feeding and quality issues commonly associated with incorrect liner length.

Short liners are a common root cause of poor wire feeding. Further, a short liner does not have a chance of properly seating in the retaining head – often resulting in "bird-nesting" of the welding wire or premature contact tip failure and wear.

Wire feeding challenges reduce efficiency of the welding process and cause undesirable (and expensive) downtime. A system upgrade to this new innovative product can help improve welding efficiency and reduce costly downtime.

 

Download PDFSpec Sheet: English  |  Espanõl  |  Français  |  Português

How It Works

Heard the buzz about our revolutionary QUICK LOAD Liner AutoLength System?

>> Español  |  >> Français

  • Housed inside the power pin, this spring-loaded module applies constant forward pressure on the liner, keeping it seated properly in the retaining head
  • Allows for up to one-inch (2.54 cm) forgiveness if the liner is too short
  • Accommodates liner movement during welding
  • NEW!! Check out our new 3D animationMP4  |  WMV

How It Increases Productivity

  • Reduces issues caused by the liner being cut to an incorrect length
  • Decreases burn-backs caused by misalignment between the liner and the contact tip
  • Improves wire feedability by enhancing wire alignment with the contact tip

 

Designed Specifically for use with QUICK LOAD™ Liners

QUICK LOAD™ Liner AutoLength™ System Part Numbers

AutoLength™ Pins

For Miller® Feeders

214-81

for 0.035" - 0.045" wire; interchangeable with 214-1 power pin

214-91

for 0.052" - 1/16" wire; interchangeable with 214-1 power pin

   

For Tweco® #4 Feeders

214-80

for 0.035" - 0.045" wire; interchangeable with 214 power pin

214-90

for 0.052" - 1/16" wire; interchangeable with 214 power pin

   

For Tweco #5 Feeders

214-812

for 0.035" - 0.045" wire; interchangeable with 214-12 power pin

214-912

for 0.052" - 1/16" wire; interchangeable with 214-12 power pin

   

For Lincoln® Feeders

214-82

for 0.035" - 0.045" wire; interchangeable with 214-2 power pin

214-92

for 0.052" - 1/16" wire; interchangeable with 214-2 power pin

   

For Panasonic® Feeders

214-814

for 0.035" - 0.045" wire; interchangeable with 214-14 power pin

214-914

for 0.052" - 1/16" wire; interchangeable with 214-14 power pin

   

For Fronius® Feeders

214-817

for 0.035" - 0.045" wire; interchangeable with 214-17 power pin

214-917

for 0.052" - 1/16" wire; interchangeable with 214-17 power pin

214-841

for 0.035" - 0.045" wire; interchangeable with 214-41 power pin

214-941

for 0.052" - 1/16" wire; interchangeable with 214-41 power pin

   

For Euro Feeders

425-820E

for 0.035" - 0.045" wire; interchangeable with 425-20E power pin

425-920E

for 0.052" - 1/16" wire; interchangeable with 425-20E power pin

   

For L-Tec® Feeders

214-84

for 0.035" - 0.045" wire; interchangeable with 214-4 power pin

214-94

for 0.052" - 1/16" wire; interchangeable with 214-4 power pin

Back to Top

AutoLength Kits*

For Miller® Feeders

214-81SA

for 0.035" - 0.045" wire; kit includes 214-81 AutoLength Pin and 415-35-25Q QUICK LOAD Liner

214-91SA

for 0.052" - 1/16" wire; kit includes 214-91 AutoLength Pin and 415-116-25Q QUICK LOAD Liner

   

For Tweco® #4 Feeders

214-80SA

for 0.035" - 0.045" wire; kit includes 214-80 AutoLength Pin and 415-35-25Q QUICK LOAD Liner

214-90SA

for 0.052" - 1/16" wire; kit includes 214-90 AutoLength Pin and 415-116-25Q QUICK LOAD Liner

   

For Tweco #5 Feeders

214-812SA

for 0.035" - 0.045" wire; kit includes 214-812 AutoLength Pin and 415-35-25Q QUICK LOAD Liner

214-912SA

for 0.052" - 1/16" wire; kit includes 214-912 AutoLength Pin and 415-116-25Q QUICK LOAD Liner

   

For Lincoln® Feeders

214-82SA

for 0.035" - 0.045" wire; kit includes 214-82 AutoLength Pin and 415-35-25Q QUICK LOAD Liner

214-92SA

for 0.052" - 1/16" wire; kit includes 214-92 AutoLength Pin and 415-116-25Q QUICK LOAD Liner

   

For Panasonic® Feeders

214-814SA

for 0.035" - 0.045" wire; kit includes 214-814 AutoLength Pin and 415-35-25Q QUICK LOAD Liner

214-914SA

for 0.052" - 1/16" wire; kit includes 214-914 AutoLength Pin and 415-116-25Q QUICK LOAD Liner

   

For Fronius® Feeders

214-817SA

for 0.035" - 0.045" wire; kit includes 214-817 AutoLength Pin and 415-35-25Q QUICK LOAD Liner

214-917SA

for 0.052" - 1/16" wire; kit includes 214-917 AutoLength Pin and 415-116-25Q QUICK LOAD Liner

214-841SA

for 0.035" - 0.045" wire; kit includes 214-841 AutoLength Pin and 415-35-25Q QUICK LOAD Liner

214-941SA

for 0.052" - 1/16" wire; kit includes 214-941 AutoLength Pin and 415-116-25Q QUICK LOAD Liner

   

For L-Tec® Feeders

214-84SA

for 0.035" - 0.045" wire; kit includes 214-84 AutoLength Pin and 415-35-25Q QUICK LOAD Liner

214-94SA

for 0.052" - 1/16" wire; kit includes 214-94 AutoLength Pin and 415-116-25Q QUICK LOAD Liner

 

*The AutoLength Kit is a limited time promotional offering that includes one AutoLength Pin and one bonus QUICK LOAD Liner.

Back to Top

Additional wire sizes may be available. Please contact Customer Service to inquire.

Product Literature

Videos and Animations

How-To Guides and Videos

Articles

Tech Connection Product News